Projects

Tcp state diagramHere, below, a list of test bench and measurement projects examples I have realized. In addition to the presentation of graphical user interfaces and features, hardware and software are also described.

  • TestStand: Car radio validation
    The aim of this test bench is to validate electronic measurements and audio signals. The system must be enough flexible to permit the test of several models of car radio. Hardware Technology The bench is composed of: Software Technology Operating software : MS Windows XPMeasurement software : NI LabWindows/CVITest Sequencer : NI TestStandReports : MS Excel How does it work ? The operator connects the car radio to the interface which is connected to the test bench. He identifies the unit to be tested with the car radio bar code. The sequence test the sound quality, the consomation, the EEPROM software and […]
  • LabWindows/CVI: Oil well sensors calibration system
    Calibration system for oil well sensors. This system measures the pressure and the temperature behavior of the sensors along one week to one month. All measurements are safeguarded in a data base to be analyzed and to create reports/ratios. Hardware Technology The system is composed of a PC computer which dialogs with oil sensors via serial bus and it is linked to a bench via GPIB bus. The bench contains several modules : Software Technology Operating software : MS Windows 2000Measurement software : NI LabWindows/CVIAnalysis software : Visual Basic, MS ACCESS, ODBC, SQLReport formats : MS EXCEL, PDF How does it work ? […]
  • LabVIEW vision: fuse box visual inspection for trucks
    The fuses and relays box test bench has two functions in trucks assembly factory: Description The fuse inspection test bench consists of: The fuse inspection test bench works in two modes:
  • LabVIEW Real-Time: refrigeration system with two temperatures
    This system allows the study of refrigeration systems and the implementation of the thermodynamic calculations applied to refrigeration. Its uniqueness is that it is fully controllable via the Internet directly from a web browser like Internet Explorer or Firefox. It consists of two cold rooms, each with their own evaporator but sharing the same cooling fluid R134a system (compressor, condenser …). The control and configuration of this system can be done in two ways: The Compact Fieldpoint adds the possibility of remote control via the Internet, viewing the evolution curves of temperature, air and refrigerant fluid, pressure and power at various points. This allows calculating the required cooling system features such as enthalpy, entropy, Mollier diagram and performance coefficients. Hardware The software is embedded in a Compact Fieldpoint controller from National Instruments. It includes a RJ45 Ethernet connector that allows to connect to the network in aim of uploading the executable on the controller module to the embedded FTP and publish shared variables on the network. We use Compact Fieldpoint module inputs / outputs, analog and relays for sending commands (start / stop, compressor speed , refrigerant solenoid valves, condenser and evaporator fans, lights and heaters for cold rooms) and collect measurements. We measure the power consumed by the compressor with the power meter included in the regulator. This regulator communicates only by Jbus protocol. So we use the RS-232 Compact Fieldpoint controller and connect to it an RS-232 <-> RS-485 converter. Jbus communication functions are programmed into the controller based on the Modbus protocol that is compatible for our use. An Ethernet 8 relays card is added to increase the number of relays. Software How does it work? The user has the option to choose, by a switch, using the bench in local mode with the classical control panel or using […]
  • LabVIEW: Weather station with a Pocket PC
    The purpose of this system is the collection of weather data, backup and transmission to the base located 5 km away. The system is portable and durable for outdoor use (rain, dust …). Hardware Technology The system is composed of : Software Technology PC operating software : MS Windows XPPocket PC operating software : MS Windows CEMeasurement software : NI LabVIEW Pocket PC and NI LabVIEW on the PC How does it work ? The operator connects the suitcase to the weather station. He opens the suitcase, switches on the Pocket PC and selects, via its touch screen, to transmit data.The weather station sent […]
  • LabVIEW: supervisor of sand quality control
    LabVIEW is used in this system to program a supervisor controlling the quality of sand in a career, before filling the trucks after the results of measurements of quality, we will inject a product to improve the characteristics of the sand to neutralize impurities (such as clay for example) and make them suitable for building. This pilot supervises three PLC (programmable logic controller), which each have a dedicated function: a sampler, a analyser and a divider. Programmable logic controller Hardware technology The excavation and filling trucks is completed by the sampler, analyzer and dozer system, wich is composed of: Software technology Operating system: […]
  • LabVIEW: clinical testing software for pharmaceuticals and cosmetics products
    This software does the automation the characterization measurements of the skin during clinical trials of pharmaceuticals and cosmetics, using more than 15 instruments usually present in this type of laboratory: corneometer, sebometer, pH-meter, thermometer, glossimeter, mexameter, colorimeter tewemeter, reviscometer, spectrocolormeter, chromameter, cutometer, torquemeter. Therefore, it makes quicker measurement through a single software tool. Hardware USB-type and series instruments are made from various manufacturers, so we have different communication protocols. The software automatically identifies each device connected to the PC and select the appropriate protocol to configure the instrument and collect measurements. corneometer, sebometer, pH-meter, thermometer, glossimeter, mexameter, colorimeter tewameter, reviscometer, spectrocolormeter, chromameter, cutometer, torquemeter Devices list for surface skin measurements compatible with this software: Software Fonctionnement After creating and configuring a study specifying the list of subjects, analysis conditions (zones, time, products) and the instruments used, or by importing data, the operator performs measurements instrument in hand. The software communicates with the instrument to collect measurements, analyze, save or export to other software tools such as Excel and print reports. A calibration function can detect and control the excesses and / or launch calibration of instruments. Regarding traceability, all actions performed by the user previously logged by its type (administrator or operator), are well recorded and identified from a history.
  • LabVIEW: Electronic Control Module (ECM) validation system
    Electronic Control Modules are subsystems consisting of CPUs and assorted signal inputs and outputs dedicated to controlling a component within the vehicle (cars, trucks…).The aim of this system is to check that all ECM actions are correct, conforming to the specifications. It performs design validation.It is a development bench, helping technicians and developers during design and developement phases. Hardware Technology The bench is composed of : Software Technology Operating software : MS Windows XPMeasurement software : NI LabVIEW, NI DAQ How does it work ? Using the measurement software, the operator selects stimuli to be sent to the ECM. Each ECM response […]
  • LabVIEW: test bench for gas analysis
    The role of this test bench is the analysis and quality control of gas cylinders used in metallurgical industries, chemical, petrochemical, pharmaceutical and food industry. The control system of gas is functionally decomposed as follows: The bench contains the following elements: Harware technology The supervision software is installed on a PC. The acquisition and control central is composed of Compact Fieldpoint modules of National Instruments. Gas analyzers are Emerson Process. The supervisor, on the PC, is linked to central by a serial link (RS232). The central commands 0/24V switches to route gas to the analyzer. The central commands analyzers by 4-20mA. Software […]

My offer

Developement and Consulting for Supervision, Control, Test and Measurement systems LabVIEW, TestStand, LabWindows

Test and Measurement development and consulting

EngineeringI am a supervision, control, test and measurement specialist. For this reason, my work consists to conceive and develop automatic or semi-automatic systems of measurement, validation or qualification of products for industrial or scientific applications.

With my experience since 1998 in the field of test and measurement, many of my clients appreciate my analysis and advice to optimize and improve both technically and in terms of production processes and validation. Indeed, test and measurement benches are central elements that identify with precision the problems caused by a malfunction or bad process: settings of production machines, manual actions or arrangement.

Technics

I support my expertise on the use of:

Job

I intervene in the various phases of life of the projects:

• Study/Research/Documentation

  • Feasibility study
  • Analyzes and research solution
  • Search for materials
  • Helps with the documentary drafting
  • Retro-engineering (analyzes systems without documentation)

• Software of tests (dregs to the material)

  • Development of advanced software functions
  • Analyzes, second reading of source codes
  • Debugging of software functions
  • Drivers of instruments
  • Development of simulators of instruments

• Software applicatifs (not dregs directly with the material)

  • Complete development of software
  • Analyzes, second reading of source codes
  • Debugging
  • Course of specifications of tests

Project examples

I invite you to read articles detailing projects examples I have done, take a look to my experiences.

Price

To obtain the detail of the prices of my interventions and developments, please contact me by email or for telephone.

Blog

blog LabVIEW, TestStand, LabWindows/CVIThis blog is dedicated to expertise and systems development of system of Supervision, Control, Test and Measurement and especially on LabVIEWTestStand and LabWindows/CVI.

  •  Activities in 2021 between Mexico, Brazil, Tunisia, China and France:Set-top box testers with connected speaker under Linux and the virtual assistant Alexa:manufacture of test interfaces for acoustic, audio, video, WiFi, Bluetooth validationinstallation on production lineproduction launch follow-upGPON fiber optic modem testers: design / manufacture of test interfaces and development of test software (based on National Instruments TestStand) to test:GPON optical fiber: functional test with OLTPhone, USB, EthernetNFT (Near Field Testing) for the verification of WiFi 6 antennasWiFi 2.4GHz and 5GHz (Throughput) and WiFi 6 speed testLed color test and automated button testDownload of client software and customization (MAC address, SSID, password, etc.)User […]
  •  Activities in 2020 between Mexico, Brazil, United States, China and France:DOCSIS 3.1 Cable gateway Testers: design / fabrication of test interfaces and development of test software (based on National Instruments TestStand) to test:DOCSIS 3.1: verification of frequency calibration tables, tested with generator and frequency analyzer + functional test with CMTSWiFi 11.ax: test of EVM, MASK, PERPhone, USB, EthernetNFT (Near Field Testing) for the verification of WiFi antennas2.4GHz and 5GHz WiFi Throughput testLed color test and automated buttons testDownload of client software automation and customization (MAC address, SSID, password, etc.)Support on WiFi tester in repair center for VDSL modem (based on TestStand)Support […]
  •  The 2019 activities are as follows:Verification of identification engraving on silver ingots: hardware integration and development of a verification system for identifiers engraved on 30 kg silver ingots in a foundry. This tester is based on National Instruments vision for cameras and LabVIEW communicating with PLCs.WiFi tester for DSL modem repair center: hardware integration and software development for testing modem PCBA cards under repair, with SMA cables, RF test probes, vector generator / analyzer, and TestStand.Integration of mesurement instruments for clinical skin analysis for cosmetology based on LabVIEW.Electronic card tester for coffee machine: development of the test sequencer and instruments drivers […]
  • During 2018 we developed solutions for measurement, test and production traceability for customers from USA, France, Brasil, Spain and Mexico.List of the major activities of this year:analysis software of sulfur in silver process, it is composed of 2 parts: the recorder software communicates with an oven where a sample is inserted, the data are saved in a database, then a client software, on the network, connect to the server to extract the required to analyse. It is used to follow the quality of the production process. This solution was developed with LabVIEW for Peñoles.Gas quality tester for food and medical industry, […]
  • The year 2017 was successful in hardware and software developments, measurement and traceability audits, training in Mexico, United States, Brazil and France.Here is a list of the main activities:fuses block test bench by vision for the Freightliner trucks production (Daimler): one in Mexico and two in the United States (LabVIEW, vision).production of two new DSL home gateway models for Sagemcom and Jabil : implementation of end of line testers (EOL) with accompaniment of the production ramp up and NPI assistance in Brazil (TestStand, LabWindows/CVI).engine test and Modbus TCP : development of a software solution for controlling an engine test bench […]
  • My main activities in 2016 are:measuring instrument for quality test of the magnesium (Peñoles): hardware and software development of a measuring instrument used in the laboratory for magnesium extraction. The instrument identifies the impurity particles present in a beaker and shows the distribution of these particles by size. The accuracy is 22 microns. The software generates reports and stores measurements in a database. Technique: LabVIEW and Vision. Location: Mexico.functional testers for DSL home gateway (Sagemcom, Jabil): technical support on the end of line testers (EOL). Technique: TestStand and LabWindows/CVI. Location: Brazil.measuring software for clinical study of the skin: it is […]
  • During this 2015 my main activities were:WiFi 2.4GHz and 5GHz tester for DSL home gateway in repair center: hardware and software development of a WiFi calibration and validation station (based Broadcom chipset) for repair center. Technique: TestStand, LitePoint. Location: United Statessoftware rework station for DSL home gateway in repair center: hardware and software development of a solution to do reworks on the flash memory thus avoiding replacement. Technique: TestStand, CLI, JTAG. Location: United Statestest benches for DOCSIS home gateway: development of EOL testers (EOL) for the production of DOCSIS modems and support production ramp up. Technique: TestStand, LabWindows/CVI, LitePoint. Location: […]
  • The year 2014 was marked by professionally the following activities:IVI drivers for measuring instruments for the oil industry: IVI drivers development using LabWindows/CVI and TestStand. Location: Francesoftware for cosmetics selection: capturing various skin measures this software indicates which cosmetic to use and in what dosage. Technique: LabVIEW. Location: Francemeasurement software and clinical study of the skin: since 2010 we add tools and features. This year it is the turn of the communications performance, instruments optimization and improvement of the measurement areas editor. Technique: LabVIEW. Location: Francefuse blocks inspection for truck: improving vision fuse blocks test benches for the production of […]
  • During the year 2013 the missions of measuring and testing took me in France, Mexico, Brazil, Tunisia, Canada and the United States. They allowed me to increase my experience in the integration of test benches in the mass production lines and test systems technical audit. And it's always a pleasure to meet various stakeholders, engineers and management teams from different sectors, different countries and communicate in different languages ​​(English, French, Spanish and Portuguese). Here's the list of my activities in 2013: Testing process audit into a xDSL modem repair center, defining solutions to establish, develop the new process, the layout […]
  • For this project, my client asked me to increase the capacity of their test suites for your after-sales service: going from 500 units daily to 2500 units per day (units here are modems ADSL / VDSL telephone, HPNA, WIFI , WAN, Ethernet and USB.) Using benchmarks aftermarket in this case is to analyse and give a diagnosis to replace defective components and then verify that the repair has solved the problem. Analysis To optimize the test suites in the best way, the analysis is essential to decide what to do I found several factors that limited the ability.: too many […]
  • The projects were exciting for 2012. Anyway I did 160 000 km by plane to see my clients: going a week in a country, 3 weeks in this one, 2 weeks in this city, but in total it is 6 months of business trips to share techniques and friendships (behind the technique there is always the human). This year I enjoyed sharing my experience, working beyond my expertise to give the best to support my clients in difficulties, improving processes at the level of software and hardware and analysing the procedures to propose changes to solve the problems, speak four […]
  • To start the year 2012 nothing better than to do the recap of last year 2011 as an independent engineer: Trainer for LabVIEW, TestStand and LabWindows/CVI for various sectors of industrial, scientific and military activities. Development of a system of eddy current measurement for detecting surface defects of the materials for nuclear plant (LabWindows/CVI). Technical intervention to improve cosmetology and pharmacology clinical study system (LabVIEW) Improvement of a thermodynamic principles bench study applied to refrigeration (LabVIEW real-time and embedded WEB server) Implementation of Modbus-TCP instruments measurements on Ethernet network and radio for the analysis of energy consumption in buildings and […]
  • This time, the conference was not about control and measurement with LabVIEW, LabWindows/CVI or TestStand but on particle accelerators in medicine for the treatment of cancer and especially the applications of synchrotron radiation to observe proteins and different mechanisms operating at the end of active use in future nanotechnology based drugs. Where does the idea of ​​this issue? I play accessory to give synchrotron "Soleil", south of Paris, operated by the CNRS (French National Center of Scientific Research) and the CEA (atomic energy commission) to optimize measurements in a beam line. Conference "Particle accelerator: the future medical lights" during the […]
  • It was a pleasure to give a conference about industrial and scientific systems of National Instruments during the international conferences in telematics engineering at the Polytechnic University of Durango, Mexico. During one hour I developed the theme of "LabVIEW Embedded systems for the variables monitoring": definition of what are the control, monitoring, simulation, test and measurement, a demonstration of programming with LabVIEW, a live video with my client at the Raspail Institute of Paris in France, to describe a cooling system using components from National Instruments and an embedded LabVIEW software I developed, to demonstrate the capabilities of remote control […]

About me

Here is a resume of my professional experience and ability as a test bench engineer, LabVIEWTestStandLabWindows/CVI specialist.

In this way, you can also visit my Viadeo page describing my skills and containing comments of some clients or my Linked-in page.

FREELANCER?

I offer services as freelancer engineer. In this way, i am your unique interlocutor for both technical and commercial aspects. I am committed to providing you works of high quality tanks to my 24 years of experience.

Where?

My clients are all over France, Europe and whole world. My activies give me the oportunity to travel an average of 100 000 km per year. So I can say I have no geographical limits. In addition to the French, I speak English and Spanish fluently and Portuguese as well.

FIELD OF COMPETENCE

I am a supervision, control, test and measurement specialist. I develop several  systems:

  • visual inspection automation,
  • tests production sequencer,
  • instruments drivers,
  • automatized and semi-automatized test and measurement benches,
  • instrumentation (National Instruments, Racal, HP, Agilent, Rodhe & Schwartz…).

My strong competence in the field of test and measurement has led me to participate in various projects of:

  • aeronautics,
  • automotive,
  • armament,
  • food,
  • petrochemicals,
  • energy, electricity,
  • telecoms,
  • construction,
  • scientific research,
  • pharmacology,
  • cosmetology.

MY CAREER

I started my professional life in 1998 when joining IS3i, a service company specialized in industrial technology (IT) within SEO Group. As a partner of National Instruments, this company was offering its service engineers to develop test benches. I had the opportunity to develop my first software dedicated to tests, measurements, acquisition and instruments control using LabVIEWTestStand and LabWindows/CVI.

In 2001, I have been promoted as a project manager. I was in charge of technical and financial proposals, follow-up and projects completion I was responsible to settle engineer teams and define material specifications to our subcontractors. During this period, our company joined Brime Technologies group within which IS3i organization was ever present.

In 2003, I took the technical direction of this former IS3i entity in Assystem France group. I had opportunity to get experience: to engineer recruitment in order to integrate my teams, to develop my ability in staff coaching and to increase my capacity in project management and broader financial trading with our customers and suppliers. Then I was charged of Zodiac Aerospace and Schlumberger accounts, responsible of engineers and technicians teams dedicated to their related technical assistance.

Throughout those experiences and always pursuing the goal to get a stronger technical skill, I decided in 2005 to wing my way and I started to offer my own expertise as a freelancer consultant.

TECHNICAL KNOWLEDGE

  • Hardware:
    Measurement and test / validation solutions
  • Computing languages and software
    C, Language G, C++, C#, Visual Basic, Fortran, Java, SQL, PHP, JSP, Pascal Object
    LabVIEWTestStandLabWindows/CVI, Visual Studio, Delphi, MySQL
    Method: UML, RUP, RAD
  • Protocols:
    GPIBVXIPXI , ARINC 429, RS (232, 422), TCP/IP, CANI2CVANBluetooth, WIFI, UHF
  • Languages:
    English, Spanish, French, Portuguese

SAGEMCOM – Telecommunication

Analysis and development of the VDSL/ADSL gateway test and repair process for aftersales capacity optimization, Campinas, Sao Paolo, Brazil
The test capacity at start was 500 units/day, after optimization: 2000 units/day

  • Process, material and operators actions optimization with the local team
  • Migration of semi manual and long tests to automation and faster testers (cycle time / 2)
  • Migration from text/command lines software to graphical test sequencer software
  • Installation of 28 testers and productions station
  • Production fails analysis (report generation, data extraction / crunching)
  • Improvement of the maintenance actions and previsions
  • Dialogue with stakeholders in English, French, Spanish and Portuguese.

Technics:

  • Tools: LabWindows/CVITestStand, Visual Basic, linux scripts
  • Hardware: DSLAM, ADSL, VDSL, HPNA, WIFI, programmable HP Ethernet switch, TCP/IP, Telnet

SCHNEIDER TOSHIBA – Electrical Industry

Schneider ToshibaCommunication card validation dedicated to implement industrial network protocols. In this case the cards are added to PLCs to control the speed of electric motors.

  • DLL development of communication protocols: Metasys, BacNet, CClink, Ethernet IP, Modbus TCP, Apogee
  • Test sequence developement
  • Integraton in the existing test bench

Technics:

CORDON ELECTRONICS – Telecommunication

New GVT Gateway high volume production line installation and optimization in Manaus, Brazil at Jabil factory for Sagemcom

  • Test benches development and tester optimization
  • Installation of 39 test benches and productions station
  • Production fails analysis
  • Improving and optimization of the production to reach 40 000 products / month
  • Interface between suppliers (France, Brazil, USA, Israel, China, Tunisia)
  • Dialogue with stakeholders in English, French, Spanish and Portuguese.

Technics:

  • Tools: LabWindows/CVITestStand, Visual Basic
  • Instrumentation: Litepoint IQFLEX WIFI calibration, DSLAM, ADSL, VDSL, USB instrumentation, RS, TCP/IP, telnet

AREVA – Nuclear power plant

areva np intercontroleDevelopment of a measurement software for non destructive EDDY measures detecting surface defects used inside nuclear power plant. This system is integrated in the MIS, a robot dedicated to the reactor vessels inspection.

Technics:

  • Tools: LabWindows/CVI
  • Instruments : Ethernet with TCP and UDP communications, EDDY measurement device of IntelligeNT

Synopsis Corporation – Microwave systems

synopsiscorp.png

  • Development of software components to edit and configure mathematical models in aim of simulating environment for radar, civil and military, test and qualification.

Technical implementation:

  • Tools: DLL development with LabVIEW and integration with Visual Studio C++ and C#

ALCATEL-LUCENT – Telecommunications industry

  • alcatel-lucentStrategical evaluation and comparative technical/financial study about software development for production test bench with LabVIEWLabWindows/CVI and Visual Studio .NET C# with Measurement Studio, concluded with a conference and migration examples illustrations given to expert and technical leaders of Alcatel-Lucent.

Technical implementation:

Soleil Synchrotron – Scientic research

  • synchrotron-soleilAcquisition expertise to resolve measurement losses on the SOLEIL synchrotron of third generation. Optimization hard and soft of GPIB communication.

Technical implementation:

  • Tools: C++, Linux, Java instruments server, National Instruments drivers

MESSER – Industrial gases

  • Messer Claim CMYK miniSpecifications and development of gas production quality test bench.

Technical implementation:

  • Tools: LabVIEW
  • Harware: National Instruments Compact FieldpointDAQDIO, RS 232 implementing AK protocol, Emerson Gas analysers

SAGEM – Telecommunications industry

  • sagemAnalysis, development and training on a generic software architecture based on TestStand, used in various production plants. Edition of development rules to integrate LabVIEW and LabWindows/CVI components in this TestStand architecture and specification of communications with the database.

Technical implementation:

Lafarge – Cement, concrete and aggregates

  • logo lafargeSpecifications of a sand quality control supervision system coming out of sand quarry for cement production.

Technical implementation:

Styrel Techonogies – Engineering

  • Styrel technologiesDevelopment: C++ to LabVIEW migration of an components and electronic cards aging measurement software.

Technical implementation:

  • Tools: LabVIEW
  • Hardware: Sefelec MegaOhmMeter, switch cards in compact PCI chassis  linked to the laptop by a GPIB-USB gateway.

MOJ NIKAN Co. – Automotive industry

  • Realization of 4 car radio test benches of the Peugeot 206
  • Project leader (4 developers)
  • Subcontractors choice and management
  • Import / Export (incorterm)

Implemented technique:

  • Tools: C language, TestStandLabWindows/CVI,
  • Instrumentation: PXI chassis, switches, multimeter DMM, DIO card, MXI3, GPIB, PCI cards (VAN bus and I2C bus), GPIB (audio generator AM/FM Panasonic, audio analyzer ROHDE & SCHWARZ, DC power supply)

EDF (Electricity of France) – Electric utility

  • Migration of a transportable VXI bench which measures partial discharges of power transformers, to a compact and portable PXI / compact PCI bench.
  • Drivers development.Technical implementation:
    • Tools: LabWindows/CVI
    • Instrumentation: portable PXI/Compact PCI chassis with high voltage acquisition card

PEUGEOT – Automotive industry

  • ECM validation bench developmentTechnical implementation:
    • Tools: LabVIEW 7.0
    • Instrumentation: continuous power supply GPIB, industrial PC: measurement software with instruments drivers, matrix PCI card, PCI acquisition card, PCI multimeter card, PCI signals generator card, PCI CAN bus card.

SIEMENS-VDO – Automotive insdustry

  • Migration of the car radio tuners test bench under the TestStand test sequencer
  • Instruments drivers and measurement libraries development.

Technical implementation:

  • Tools: C, TestStandLabWindows/CVI, Excel.
  • Instrumentation: GPIB, audio generator AM/FM, audio analyser, matrix, multimeter, oscilloscope, I2C bus

DGA – Military equipment

  • dgaDevelopment of a meteorology data transmission autonomous system on pocket PC communicating with a base situated at 5 km. The goal of this system is measuring the effect of the climatic effects on military tank fire.
  • 5 km transmission using WIFI or UHF. The local transmission is Bluetooth.

Technical implementation:

  • Tools: Windows móvil, LabVIEW for Pocket PC
  • Instrumentation: PCMCIA acquisition DAQ board, WIFI, UFH, Bluetooth, directional antennas.

ZODIAC AEROSPACE – Avionic industry

  • Development of a system (hardware and software) to validate an electric consumption management calculator of the A380 from Airbus.

Technical implementation:

  • Tools: C, LabWindows/CVI
  • Instrumentation: VXI chassis (switches, multimeter DMM, acquisition DAQ card, signals generator), CAN bus and SIS (I2C bus)

ZODIAC AEROSPACE – Avionic industry

Avionic calculators’ production support department (Airbus, Boeing, Bombardier, Dassault, Embraer, Saab…)

  • Test libraries development for TestExe, a test sequencer.
  • Tools libraries development.
  • Development of a test sequencer under TestStand interfaced with a data base.
  • Development of software of test and management of production of downloadable diskettes on calculator.
  • Development of downloadable software of basic creation of data hard calculator.
  • Calculators test software maintenance.
  • Design of software architectures for the semi-automatization of test bench.

Technical implementation:

  • Tools: C , LabWindows/CVI, Visual C ++, TestStand, TestExe, Access, Excel, ODBC
  • Instrumentation: ATHENA 7000 bench  : VXI chassis (switches, multimeter DMM, acquisition DAQ, signals generator, ARINC, RS-422)

ZODIAC AEROSPACE – Avionic industry

  • Technical expertise on planes calculators error codes analysis software (Airbus and Boeing).
  • Modification of the software.
  • Technical training of an engineer for the support of the software

Technical implementation:

SCHLUMBERGER – Oil insdustry

  • Migration of a measurement system from old Windows version to up to date Windows version , up to date CVI, up to date ACCESS.
  • Project leader; management of 2 developers; planning of tasks, deliveries of prototypes at the customer site.
  • Validation with the customer.

Technical implementation:

  • Tools: C ANSI, LabWindows/CVI, Windows, Access, Visual Basic, ODBC.

SCHLUMBERGER – Oil insdustry

  • Migration of a test system of optical coder used by engines, DOS Qbasic to the TestStand sequencer with C libraries.
  • Project leader; management of 2 developers; planning of tasks.
  • Software expertise.
  • Validation with the customer.

Technical implementation:

SCHLUMBERGER – Oil insdustry

  • Calibration system development for oil well probes.
  • Persone in charge for the maintenance of the probes calibration system: problems gravity analyze, treatment, intervention at the customer.

Technical implementation:

  • Tools: C language, LabWindows/CVI, Windows, Access, Visual Basic, ODBC.
  • Instrumentation: GPIBRS-232, switches, multimeter DMM, DC power supply, temperature generator, pressure generator, barometer.

SCHLUMBERGER – Oil insdustry

  • Migration of a geophones test system, from FORTRAN to C language with LabWindows/CVI.
  • Migration of well oil probes test systems, from FORTRAN to C language with LabWindows/CVI.
  • Development of measurement software of pressure for concrete test-piece.

Technical implementation:

  • Tools: C language, LabWindows/CVI, Windows.
  • Instrumentation : GPIB, multimeter DMM, PCI switches, acquisition card with integrated frequency analyzer, DC power supply.

ROHDE & SCHWARZ – Electronic test equipment

  • Technical demonstrator for the account of R&S to carry out, for Motorola Toulouse, the demonstration of a acoustic test bench for cellular phones.

Technical implementation:

  • Instrumentation: Instrumentation: audio generator / audio analyzer UPL from Rohde y Schwarz.

ALCATEL – Telecoms

  • Measurement libraries development the test sequencer of Screenphone, a phone/internet station.

Technical implementation:

TDF – Telecoms

  • Modification and debugging of measurement software of TV transmition quality.

Technical implementation:

ONE ACCESS – Telecoms

  • Test and evaluation of the developments under Linux for migration study of Unix  development station to Linux.

Technical implementation:

  • Tools: C ANSI, Linux Redhat, Unix Solaris.

Contact

Adrien Jolly

Test bench engineer, LabVIEW, TestStand, LabWindows/CVI, instrumentation specialist

Telephone: +33.(0)9.70.40.75.73

http://www.a-jolly.com

Information:

Skype id : adrienjo